復合膜塑料袋圖案印刷較為復雜，所以刷印的效果 直接應響到塑料的質量，圖案的印刷的效果又和版一直接的關系，所以一定要選擇技術 和質量較好的制版廠來完成制版，以免給以后的塑料印刷造成一些麻煩，聚乙烯袋子印 刷較為簡單，吹膜則為生產過程中重中之重，在調整膜的規格如寬度和膜厚度有較強的 技術性，如果卡不好這一關有可能造成膜薄導制檢驗為不合格產品或吹的過厚剛會賠掉 過厚部分料的錢。吹膜生產所用的機器也效為簡單，現在復合袋所用的機器大多都為全 電腦控制的，所以是精度都比較高，聚乙烯袋和復合袋不僅是生產機器上有有大的差異 ，就是材料和所用油墨也不相同，聚乙烯袋大都便用表印油墨，復合袋則用里印油墨， 復合袋是先印刷后再復膜，所以油墨在幾層膜的中間，裝食品時油墨不會污染到食品， 當然塑料印刷當中因?yàn)榭蛻裟敲?，其中水份也很大，比如有一些塑料廠做抽真空袋 ，他們則選用了PE共擠膜這樣成本是減少了很多，但是效果遠遠比不上尼龍

The pattern printing of composite film plastic bags is relatively complicated, so the effect of brushing directly affects the quality of the plastic. The effect of pattern printing is closely related to the plate. Therefore, it is necessary to select a plate making factory with better technology and quality to complete the plate making, so as to avoid causing some trouble to the plastic printing in the future. The printing of polyethylene bags is relatively simple, and film blowing is the most important in the production process, There is a strong technicality in adjusting the specifications of the film, such as the width and the thickness of the film. If the card is not properly stuck, it may cause the film thin guide inspection to be unqualified products or the blown film is too thick, and the money of the excessively thick material will be lost. The machines used for film blowing production are also simple. Most of the machines used for composite bags are controlled by computers, so the accuracy is relatively high. Polyethylene bags and composite bags are not only different in production machines, but also different in materials and inks. Most polyethylene bags use surface printing ink, while composite bags use inner printing ink. Composite bags are printed first and then laminated, so the ink is in the middle of several layers of films, The ink will not pollute the food when the food is loaded. Of course, because the customers are so professional in plastic printing, the water content is also very large. For example, some plastic factories make vacuum bags, and they use PE coextrusion film, which reduces the cost a lot, but the effect is far less than that of nylon

可能使用中會出現漏氣等很多問題，PET塑料袋制作則選用PET轉移膜為原材料，氣密性就沒那么好，充淡氣的袋子可會漏氣，厚度有可能達不到客戶所預訂的厚度，也有可能材質上有差異，所以客戶也應了解一些有關塑料包裝料的知識，了解塑料袋加工工藝流程，我們可以對塑料袋加工有個更好的了解。

There may be many problems such as air leakage during use. The pet transfer film is used as the raw material for the production of PET plastic bags, so the air tightness is not so good. The bags filled with light air may leak, and the thickness may not reach the thickness ordered by the customer, or there may be differences in the material. Therefore, the customer should also know some professional knowledge about plastic packaging materials and know the processing process of plastic bags, We can have a better understanding of plastic bag processing.

以上就是為大家介紹的有關濟南方便袋的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://m.ssxx10.com

The above is the detailed introduction of Jinan convenience bag. I hope it will help you. If you have any questions, please contact us. We will provide you with services with a professional attitude http://m.ssxx10.com